|
|
| |
SHARPENING
|
Lindsay Graver Sharpening System
Click for
INSTRUCTIONS FOR USING SHARPENER
Sharpening Fixture without stones $89
Bench stone 260 diamond grit (6" x 2" x 1/2") $39
Bench stone 600 diamond grit (6" x 2" x 1/2") $39
Bench stone 1200 diamond grit (6" x 2" x 1/2") $39
Bench stone 2000 diamond grit (6" x 2" x 1/2") $39
Sharpening System with fixture and all four
diamond bench stones
Introductory price $199
The sharpening fixture is supplied with one set of templates to make a Universal graver point similar to the presharpened graver supplied with
each sale of a Classic AirGraver or PalmControl AirGraver handpiece.
Additional templates are listed below.
|
 |
All templates provide a point with a nominal: 45 degree face, 16.5 degree high heel. The face and heel can
be changed together in the fixture by simply reducing the graver length protruding from the fixture.
| "Calligraphy" 123.2 V |
Uniform-Parallel Point™
$22 |
| "Universal" 116.7 V |
Uniform-Parallel Point™
(comes supplied with fixture) $22 |
| "Detailing" 96.3 V |
Uniform-Parallel Point™
$22 |
| 70 V |
Uniform-Parallel Point™
(Eliminate heel grinding for a bulino dot graver. Include heel grinding for bulino lines (nominal 55 degree face, 16.5 degree high heel)
(coming soon) |
| 80 V |
Uniform-Parallel Point™
(Eliminate heel grinding for a bulino dot graver. Include heel grinding for bulino lines (nominal 55 degree face, 16.5 degree high heel)
(coming soon) |
| Flat Graver |
Nominal 45 degree face, 16.5 degree high heel
(coming soon) |
| 20 V knife graver |
Used for a small inlay undercut graver
(coming soon) |
Order Form |
1/16" thick 6"
Diameter Diamond Sharpening Laps
Will replace laps on power hones originally supplied with 5" diameter laps.
1200 grit diamond lap
$44
600 grit diamond lap
$56
260 grit diamond lap
$65
100 grit diamond lap
$88
Note: If extra height is needed, these 1/16" plates can be made thicker by placing them on an old 1/2"
thick lap . A 1/2" thick x 6" solid aluminum backing plate is available
$38.00 |
 |
|
New Dual Grit
Diamond Lap
Touch-up Graver diamond lap
1/16" thick 6" diameter lap with
600 mesh and 1200 combined on one disc
This lap combines two
meshes: 1200 on the outer area and 600 on the inner. No need to change laps.
1200-600 grit diamond lap
$68
|
 |
|
Graver polishing
Apply diamond compound to the back side of a
1/16" thick steel diamond lap (sold above) and use it for polishing graver
facets. When a metal lap is used, some of the diamond will embed itself
into the steel preventing it from wiping off. This is called “charging” a
lap. A copper lap works well for this too. More information about polishing gravers can be found on the EngravingSchool.com site:
Link 1
Link 2
1/2 Micron, 60,000 mesh, 5-gram syringe $25
|
 |
|
